Insulation Contractors in Bathurst Manor, ON
Attic air sealing, blown-in top-ups and taking out old insulation, for houses in Bathurst Manor and Wilson Heights.
We are insulation contractors working in Bathurst Manor, about 9 km from us. The M3H postal area covers Bathurst Manor, Wilson Heights and Downsview North, and we work in all three. We look at the attic or wall first. Then the scope, the material and the bag count go on a firm quote.
Bathurst Manor houses from 1954 to the early 1960s
Bathurst Manor is a suburban community built between 1954 and the early 1960s. It sits between Finch Avenue West, Dufferin Street, the west branch of the Don River and Sheppard Avenue West. A house from those years may still have the same insulation that went into the attic when it was framed.
If your attic has never been air sealed, we seal it before adding anything. We pull the old insulation back from the top plates and seal the gaps around wiring holes, the plumbing stack and the chimney. The hatch gets weatherstripping, plus a board of rigid insulation on the back. Then baffles go in at the eaves so air can still travel from the soffit vents up to the roof vents.
Only then does the new layer go down. We mark depth points across the attic floor and check each one with a depth ruler before we pack up. Old insulation that is wet, flattened or full of droppings comes out first, and that removal shows up as its own line on the quote. There's more on materials and depths on our attic insulation contractors page.
Bungalows and newer housing in Wilson Heights
Clanton Park, which takes in Wilson Heights, has everything from 1950s bungalow-style homes to new medium-rise condominiums. The land between Wilson Heights Boulevard and Faywood Boulevard used to belong to the Downsview airport and was built on around the 1990s, so those houses are a generation younger than the bungalows next to them.
If your house is a bungalow, it has one open attic floor over the whole house, and that suits blown-in insulation well. We run a hose from the machine on the truck to the hatch and lay tarps along the path through the house. Cellulose goes across the joists at an even depth, right out to the baffles. Your quote lists the bag count, so you can check it against the empty bags at the end of the day. For how cellulose and loose fill compare, see the blown-in insulation page.
If your house is newer, the attic may already have a fair layer in it. What matters is whether it reached the depth it was meant to and stayed there. We measure with a ruler in several spots and look for bare patches near the hatch and the eaves, where insulation gets kicked aside or blown back by wind coming in through the soffits.
What goes on a Bathurst Manor quote
For the insulation itself, our quote lists each area, the material, the depth or thickness and anything that has to come out first. If the insulation is one part of a bigger renovation, tell us what else is changing so the quote matches the house.
Every service we offer is on our home page.
Neighbouring areas we cover: Downsview, Lawrence Manor and North Park
We also work in the areas around Bathurst Manor, and each one has its own page: Downsview, Lawrence Manor and North Park.
Local details for Bathurst Manor
- Postal codes: M3H
- Distance: About 9 km away in a straight line
- Permit rules: toronto.ca
- Nearby: Downsview, Lawrence Manor, North Park
About Bathurst Manor: Bathurst Manor, ON on Wikipedia ยท Bathurst Manor on Google Maps
FAQ
Insulation questions from Bathurst Manor
A 1950s Bathurst Manor attic should be air sealed first, then topped up with blown-in insulation to the depth written on the quote. Sealing the top plates, wiring holes, plumbing stack and hatch keeps warm, damp air from rising into the roof space. Baffles at the eaves hold the new layer back from the soffit vents so the roof can still breathe.
A newer Wilson Heights house needs more insulation only if the attic has fallen short of its intended depth or has bare patches. The houses on the former airport land went up around the 1990s, but loose insulation settles, and it gets pushed aside near the hatch and the eaves. We measure at several points and quote a top-up only where the ruler shows it's thin.
No. Adding or replacing insulation in Bathurst Manor doesn't need a building permit from the city, though the work still has to meet the Zoning Bylaw. That's true for a top-up, new spray foam, or pulling out old material and putting in new.
Get a quote
Book an insulation visit in Bathurst Manor
Call (437) 563-1402 or send the form. We'll come and look at the space, go over the options with you and give you a firm quote.






